 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HAT1023R Silicon P Channel Power MOS FET High Speed Power Switching ADE-208-436 G (Z) 8th. Edition June 1997 Features * * * * Low on-resistance Capable of 2.5 V gate drive Low drive current High density mounting Outline SOP-8 8 5 76 56 7 8 DD D D 3 12 4 4 G 1, 2, 3 Source 4 Gate 5, 6, 7, 8 Drain SSS 123 HAT1023R Absolute Maximum Ratings (Ta = 25C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Symbol VDSS VGSS ID I D(pulse) Note1 Ratings -20 10 -7 -56 -7 Unit V V A A A W C C Body-drain diode reverse drain current I DR Channel dissipation Channel temperature Storage temperature Note: Pch Tch Tstg Note2 2.5 150 -55 to +150 1. PW 10s, duty cycle 1 % 2. When using the glass epoxy board (FR4 40 x 40 x 1.6 mm), PW 10s 2 HAT1023R Electrical Characteristics (Ta = 25C) Item Drain to source breakdown voltage Gate to source breakdown voltage Gate to source leak current Zero gate voltege drain current Gate to source cutoff voltage Static drain to source on state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Body-drain diode forward voltage Body-drain diode reverse recovery time Note: 3. Pulse test Symbol V(BR)DSS V(BR)GSS I GSS I DSS VGS(off) RDS(on) RDS(on) |yfs| Ciss Coss Crss t d(on) tr t d(off) tf VDF t rr Min -20 10 -- -- -0.5 -- -- 9 -- -- -- -- -- -- -- -- -- Typ -- -- -- -- -- 0.027 0.04 14 2250 1120 300 40 200 280 220 -0.9 75 Max -- -- 10 -10 -1.5 0.04 0.06 -- -- -- -- -- -- -- -- -1.4 -- Unit V V A A V S pF pF pF ns ns ns ns V ns IF = -7A, VGS = 0 Note3 IF = -7A, VGS = 0 diF/ dt =20A/s Test Conditions I D = -10mA, VGS = 0 I G = 100A, VDS = 0 VGS = 8V, VDS = 0 VDS = -20 V, VGS = 0 VDS = -10V, I D = -1mA I D = -4A, VGS = -4V Note3 I D = -4A, VGS = -2.5V Note3 I D = -4A, VDS = -10V Note3 VDS = -10V VGS = 0 f = 1MHz VGS = -4V, ID = -4A VDD -10V 3 HAT1023R Main Characteristics Power vs. Temperature Derating 4.0 Pch (W) Test Condition : When using the glass epoxy board (FR4 40x40x1.6 mm), PW < 10 s 3.0 -100 I D (A) -30 -10 -3 -1 -0.3 -0.1 Ta = 25 C 1 shot pulse DC PW = Maximum Safe Operation Area 10 s 100 s 1m s Op er 10 Channel Dissipation Drain Current ati m s 2.0 (P N W ote Operation in <4 10 this area is s) limited by R DS(on) on 1.0 -0.03 0 50 100 150 Ta (C) 200 Ambient Temperature -0.01 -1 -3 -10 -30 -100 -0.1 -0.3 Drain to Source Voltage V DS (V) Note 4 : When using the glass epoxy board (FR4 40 x 40 x 1.6 mm) Typical Output Characteristics -10 V -5 V -20 -4 V -3.5 V -3 V -2.5 V Typical Transfer Characteristics -20 Tc = -25 C 25 C -12 75 C I D (A) Pulse Test -12 Drain Current -8 -2 V Drain Current ID (A) -16 -16 -8 -4 VGS = -1.5 V 0 -2 -4 -6 Drain to Source Voltage -8 -10 V DS (V) -4 V DS = -10 V Pulse Test 0 -1 -2 -3 Gate to Source Voltage -4 -5 V GS (V) 4 HAT1023R Drain to Source Saturation Voltage vs. Gate to Source Voltage Drain to Source Saturation Voltage V DS(on) (V) Pulse Test Drain to Source On State Resistance R DS(on) ( ) -0.5 Static Drain to Source on State Resistance vs. Drain Current 0.5 Pulse Test 0.2 0.1 VGS = -2.5 V -4 V -0.4 -0.3 0.05 -0.2 I D = -5 A -2 A -1 A 0.02 0.01 -0.1 0 -6 -2 -4 Gate to Source Voltage -10 V GS (V) -8 0.005 -0.2 -0.5 -1 -2 Drain Current -5 -10 -20 I D (A) Static Drain to Source on State Resistance R DS(on) ( ) Forward Transfer Admittance |y fs | (S) Static Drain to Source on State Resistance vs. Temperature 0.10 Pulse Test 0.08 I D = -5, -2, -1 A 0.06 V GS = -2.5 V 0.04 -5, -2 , -1 A 0.02 0 -40 -4 V Forward Transfer Admittance vs. Drain Current 50 20 10 75 C 5 25 C Tc = -25 C 2 1 0.5 -0.2 V DS = -10 V Pulse Test -0.5 -1 -2 -5 -10 -20 Drain Current I D (A) 0 40 80 120 160 Case Temperature Tc (C) 5 HAT1023R Body-Drain Diode Reverse Recovery Time 1000 Reverse Recovery Time trr (ns) 500 Capacitance C (pF) 10000 3000 1000 300 100 30 10 0 Ciss Coss Crss Typical Capacitance vs. Drain to Source Voltage 200 100 50 20 10 -0.2 di / dt = 20 A / s VGS = 0, Ta = 25 C -0.5 -1 -2 -5 -10 -20 Reverse Drain Current I DR (A) VGS = 0 f = 1 MHz -4 -8 -12 -16 -20 Drain to Source Voltage V DS (V) Dynamic Input Characteristics V DS (V) VDD = -5 V -10 V -20 V V GS (V) 0 0 1000 500 Switching Time t (ns) Switching Characteristics -10 -2 t d(off) tf Drain to Source Voltage -20 V DS -4 V GS -6 Gate to Source Voltage 200 100 50 tr t d(on) -30 V DD = -20 V -10 V -5 V I D = -7 A 16 32 48 64 Gate Charge Qg (nc) -40 -50 0 -8 20 10 -0.2 -10 80 V GS = -4 V, V DD = -10 V PW = 3 s, duty < 1 % -0.5 -1 -2 Drain Current -5 -10 -20 I D (A) 6 HAT1023R Reverse Drain Current vs. Source to Drain Voltage -20 Pulse Test Reverse Drain Current I DR (A) -16 -12 V GS = -5 V 0, 5 V -8 -4 0 -0.4 -0.8 -1.2 -1.6 -2.0 Source to Drain Voltage V SD (V) Normalized Transient Thermal Impedance vs. Pulse Width 10 Normalized Transient Thermal Impedance s (t) 1 D=1 0.5 0.1 0.2 0.1 0.05 0.01 0.02 0.01 ch - f(t) = s (t) * ch - f ch - f = 83.3 C/W, Ta = 25 C When using the glass epoxy board (FR4 40x40x1.6 mm) ls pu e PDM PW T 0.001 1sh ot D= PW T 0.0001 10 100 1m 10 m 100 m 1 10 100 1000 10000 Pulse Width PW (S) 7 HAT1023R Switching Time Test Circuit Vin Monitor D.U.T. RL 90% Vin -4 V 50 V DD = -10 V Vout td(on) 90% 10% tr td(off) 90% 10% tf Vout Monitor Vin 10% Switching Time Waveform 8 HAT1023R Package Dimensions Unit: mm 5.0 Max 8 5 1 4 4.0 Max 1.75 Max 6.2 Max 0.25 Max 0 - 8 1.27 0.51 Max 0.25 Max 1.27 Max 0.15 0.25 M Hitachi Code FP-8DA -- EIAJ MS-012AA JEDEC 9 HAT1023R Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & IC Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 2000 Sierra Point Parkway Brisbane, CA 94005-1897 Tel: <1> (800) 285-1601 Fax: <1> (303) 297-0447 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright (c) Hitachi, Ltd., 1998. All rights reserved. Printed in Japan. 10 |
Price & Availability of HAT1023R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |